How are drywall partition walls made?

Many of our customers, gypsum board partition wall information about us by looking for information. We want to prepare an article on how to make plasterboard partition walls in order to be more useful to you. If you have a subject in our article, please contact us and get detailed information.

According to the structure of the area to be applied before making the partition wall of hawthorn, it is useful to choose the right plasterboard panel according to the purpose of use and to say that the measurements should be taken professionally. Please contact us if you are not working with someone professional about it. Let us try to help you with our professional team.

When making a drywall wall, it is necessary to start from the ground as in normal walls. The skeleton is cut according to this dimension. This framework is of great importance since the wall will be shaped according to this skeleton. After the ground frame is fixed in the area where the wall will be constructed, a drill will open the skeleton on the floor and the ground will be marked.

The areas marked on the ground in this way are then drilled with the appropriate drill bits. It is very important to use the appropriate insert according to the dowel to be used here. After the ground is drilled, the dowels are attached and fixed on the floor frame by fixing it securely. Then, the skeleton is attached to the area where the plasterboard wall panel will rest. For this purpose, a correct measurement is taken from the floor to the ceiling with the help of the spirit level and the area where the skeleton will be placed is marked. Again as in the floor before the skeleton is cut according to this size and the skeleton through the drill and screw places are opened with the help of dowels on the floor where the future will be marked, and then drill the wall with a suitable drill bit.

 

The skeleton is inserted and fixed. The quality of the materials to be used here is very important. If there is no quality workmanship, the wall starts to swing after a while. In this way, after the skeleton is fixed in the ceiling, the skeleton is cut to the free space by the help of the spirit level and attached to the frame fixed to the lower and upper areas. This way the exoskeleton is finished.

Considering that the width of a panel is 120 cm on average, the support profiles are thrown between this outer profile at 40 cm intervals. After this process, the planned plasterboard panels are fixed to the frame by means of screws. If you want to have sound insulation and heat insulation, you can provide it by placing insulating glass in the middle of the panels. Care must be taken when working with drywall panels. Because, as you know, gypsum board panels have a delicate structure and if you press it on six empty surfaces it may break. When fixing the drywall to the skeleton, it is useful to embed the screws in a very small way. Because the plaster places should not be distressed when paint is done after plasterboard.

After the plasterboard installation process, satin curtain plaster and metal corner profiles should be placed. Metal corner profiles make the wall look better. After the corners are prepared, the corner profiles are pressed onto the plaster and adhered to the plaster. After that, two plasterboard joints, the other plasterboard joints and the nails with satin plaster is corrected with the process. This joint is strengthened once more by means of joints. The plaster is then pulled over this joint tape. In this way, the reinforcing plaster is allowed to dry after extraction.

After that, a two-fold satin plaster is made on this wall. After the plaster is removed, sanding is performed. In this way, the wall is ready to be painted. After the wall has been painted, we have now delivered our gypsum plasterboard to our customers. As you can see, it is very difficult for a master to know this process very easily.

 

Here, material quality is very important elements of workmanship and price. If you want to reach all these components from a single address, it is best to search for us without wasting any time. We can do plasterboard wall partition application in the space you want to drywall partition wall. If you want, you can learn about us by searching for the references we have worked before. Thanks for choosing us.